Independent livewells and cockpit controls
Each Phoenix livewell operates as an independent port or starboard system with dedicated fill, recirculation and pumpout functions. Each side uses a fill pump, recirculation pump and pumpout pump, with manual and automatic functions controlled from the master switch panel.
Manual aeration fills the selected well. Automatic aeration runs a 2-minute on, 2-minute off cycle, while recirculation moves water from the bottom of the well to the mid-level fitting. Pumpout can draw from the port well, starboard well or both wells through two fittings at the port rear corner. Phoenix owner’s manual
Independent controls let an angler separate groups of fish, change aeration or recirculation on one side without changing the other, and place a newly caught fish in one well during a cull without opening the second well. At weigh-in, the selected pumpout setting moves water from one or both wells toward the weigh-in bag.
Fishing-deck capacities across the 2027 lineup
Eleven of the 12 current models use a 96-inch beam. The 818 Pro uses a 94-inch beam. Livewell capacity changes from 44 gallons on the larger platforms to 40 gallons on most 19-foot models and the 720 ZXL, then to 34 gallons on the 818 Pro.
| Model | Length | Beam | Livewell | Fuel | Approx. weight | Rod-storage provision |
|---|---|---|---|---|---|---|
| 21 LXE | 21'6" | 96" | 44 gal | 50 gal | 1,950 lb | Choice of fiberglass rod-locker configuration, passenger-seat rod box with rod ramp and buckle, plus port and starboard deck buckles |
| 20 LXE | 20'6" | 96" | 44 gal | 50 gal | 1,850 lb | Choice of fiberglass rod-locker configuration, passenger-seat rod box with rod ramp and buckle, plus port and starboard deck buckles |
| 921 Elite X | 21'6" | 96" | 44 gal | 50 gal | 1,950 lb | Passenger-seat rod box with rod ramp and buckle, plus port and starboard deck buckles |
| 921 Elite X II | 21'6" | 96" | 44 gal | 50 gal | 1,950 lb | Passenger-seat rod box with rod ramp and buckle, plus port and starboard deck buckles |
| 920 Elite X | 20'6" | 96" | 44 gal | 50 gal | 1,850 lb | Passenger-seat rod box with rod ramp and buckle, plus port and starboard deck buckles |
| 920 Elite X II | 20'6" | 96" | 44 gal | 50 gal | 1,850 lb | Passenger-seat rod box with rod ramp and buckle, plus port and starboard deck buckles |
| 919 Elite X | 19'8" | 96" | 40 gal | 43 gal | 1,800 lb | Passenger-seat rod box with rod ramp and buckle, plus port and starboard deck buckles |
| 721 ZXL | 20'11" | 96" | 44 gal | 50 gal | 1,850 lb | Two full-size rod lockers, passenger-seat rod box with rod ramp and buckle, plus port and starboard deck buckles |
| 720 ZXL | 20'5" | 96" | 40 gal | 50 gal | 1,850 lb | Passenger-seat rod box with rod ramp and buckle, plus port and starboard deck buckles |
| 919 ZXL | 19'8" | 96" | 40 gal | 43 gal | 1,800 lb | Passenger-seat rod box with rod ramp and buckle, plus port and starboard deck buckles |
| 819 ZXL | 19'8" | 96" | 40 gal | 43 gal | 1,800 lb | Passenger-seat rod box with rod ramp and buckle, plus port and starboard deck buckles |
| 818 Pro | 18'6" | 94" | 34 gal | 36 gal | 1,500 lb | Passenger-seat rod box with rod ramp and buckle, plus port and starboard deck buckles |
Storage arranged around the tournament workflow
The passenger-seat rod box moves rods below deck through a rod ramp and holds the staged bundle with a rod buckle. Port and starboard buckles secure the rods left on the front deck before a run, allowing two anglers to keep separate working sets without stacking every rod on one side.
| Storage point | Tournament-day use | Current-model availability |
|---|---|---|
| Passenger-seat rod box | Stores rods below deck through a rod ramp and secures them with a dedicated buckle | All current models |
| Port and starboard deck buckles | Secures active rods on both sides before moving between spots | All current models |
| Under-seat net storage | Keeps the landing net out of the cockpit path but reachable by either angler | All current models |
| Drop-in rear storage trays | Separates frequently used tools and smaller items from the main rear compartments | LXE, Elite X and ZXL models |
| Quick-access cockpit drawer | Holds tools and terminal tackle that need to be reached from the seats without opening a front-deck lid | LXE and Elite X models |
| Day box | Keeps the day’s active tackle directly in front of the driver’s console | 21 LXE, 921 Elite X and 921 Elite X II |
LED compartment lighting is standard across the current lineup. LXE and Elite X models add stainless steel slam latches on all compartments, while ZXL and Pro models use stainless steel locking latches. These systems keep lids secured during runs and make the correct compartment easier to identify before sunrise or after a late weigh-in. 921 Elite X standard features, 21 LXE standard features, 919 ZXL standard features, 818 Pro standard features
Front deck width, lid layout and the bow control zone
The 96-inch beam establishes the overall width on every current model except the 94-inch 818 Pro, but front deck geometry determines how much of that width reaches the bow. The 721 ZXL front deck is 4 inches wider than the 721 Pro XP platform and uses a three-lid arrangement with two full-size rod lockers and a large center storage box. 721 ZXL deck layout
The 921 Elite X combines the 96-inch beam with an elevated deck height and a bow designed for as many as three stacked graphs. The raised deck provides the working level used for casting and storage access, while the graph stack concentrates the screens at the bow shroud instead of spreading separate mounts across storage lids.
The stacked layout occupies the forward instrument zone directly ahead of the trolling-motor position. It does not replace the passenger-seat rod box, the port and starboard rod buckles or the primary storage lids, which remain separate standard features. 921 Elite X bow and deck details
Graph selection, brackets, power distribution and forward-facing sonar installation are covered separately in Rigging a Bass Boat for Multiple Graphs and Forward-Facing Sonar.
Culling equipment and bilge-pump count by model group
The Phoenix Culling System is standard on the 21 LXE, 20 LXE, every Elite X model and the 919 ZXL. Combined with separate livewell controls, it supports a cull sequence in which the replacement fish can enter one well while the second well remains closed.
Two 1,100 GPH automatic bilge pumps are standard on both LXE models, every Elite X model and the 919 ZXL. The 721 ZXL, 720 ZXL, 819 ZXL and 818 Pro use one 1,100 GPH automatic bilge pump as standard equipment. 20 LXE equipment, 919 Elite X equipment, 919 ZXL equipment, 721 ZXL equipment
Illustrative event day: a 921 Elite X from loading to weigh-in
- 5:15 a.m., loading: Stored rods go through the passenger-seat rod box and rod ramp. The day’s active boxes go in the day box, culling and fish-care items remain near the rear trays, and the landing net sits under the seats.
- 6:30 a.m., takeoff: The working rods remain on deck under the port and starboard rod buckles. Both compartment lights and stainless steel slam latches support a closed, organized deck before the first run.
- 8:20 a.m., first keepers: The port livewell fills through its manual aerator control. Automatic mode can then run the 2-minute on, 2-minute off fill cycle. The starboard well remains independently controlled.
- 12:10 p.m., sixth keeper: The new fish enters the starboard well while the original group remains in the port well. The Phoenix Culling System supports the replacement decision without opening both wells at once.
- 2:45 p.m., weigh-in: The pumpout control selects port, starboard or both wells. Water exits through the port rear fittings for the weigh-in bag, followed by fish transfer and final drainage after the event.
The 921 Elite X supplies a 44-gallon livewell capacity, 50-gallon fuel capacity, 96-inch beam, day box, cockpit drawer, rear trays and two 1,100 GPH automatic bilge pumps for this workflow. 921 Elite X specifications, Phoenix livewell operating instructions
Frequently asked questions
Can the port and starboard Phoenix livewells run different settings?
Yes. Each well has independent fill, recirculation and pumpout functions, so one side can use manual or automatic aeration without applying the same setting to the other side. Pumpout can also select the port well, starboard well or both. Automatic fill operates on a 2-minute on, 2-minute off cycle. Phoenix owner’s manual
Which Phoenix models have a 44-gallon livewell?
The 21 LXE, 20 LXE, 921 Elite X, 921 Elite X II, 920 Elite X, 920 Elite X II and 721 ZXL have 44-gallon livewell capacity. The 919 Elite X, 720 ZXL, 919 ZXL and 819 ZXL use 40-gallon livewells. The 818 Pro uses a 34-gallon livewell. Phoenix current model lineup
Is the Phoenix Culling System standard on every current model?
The Phoenix Culling System is standard on both LXE models, all five Elite X models and the 919 ZXL. The 2027 builder lists the system as an available option on models including the 721 ZXL and 818 Pro, allowing the culling setup to be added when configuring those boats. 721 ZXL builder, 818 Pro builder
Do three stacked bow graphs remove rod or tackle storage?
Three stacked bow graphs use the dedicated bow shroud area rather than the passenger-seat rod box or port and starboard deck buckles. On the 721 ZXL, the bow layout remains paired with two full-size rod lockers and a large center storage box. On the 921 Elite X, the stack sits within the elevated front-deck layout. The forward bow becomes an instrument zone, while the principal rod and tackle compartments remain available.
Are two 1,100 GPH bilge pumps standard on every Phoenix bass boat?
Two 1,100 GPH automatic bilge pumps are standard on LXE models, Elite X models and the 919 ZXL. The 721 ZXL, 720 ZXL, 819 ZXL and 818 Pro have one 1,100 GPH automatic bilge pump as standard equipment. The pump count is therefore tied to the model’s standard feature package rather than livewell capacity alone. 919 ZXL standard equipment, 819 ZXL standard equipment
References
- Phoenix Boats Owner’s Manual and livewell instructions
- Phoenix LXE Series specifications
- Phoenix Elite X Series specifications
- Phoenix ZXL Series specifications
- Phoenix 818 Pro specifications and standard features
- Phoenix 921 Elite X specifications and standard features
- Phoenix 721 ZXL deck, storage and capacity specifications